目前电动机软启动器MVC系列测量功能参数测量啊
电动机软启动器MVC系列测量功能/参数(测量页面)
MVC Plus系列提供一个仪表测量功能以供用户观察电动机的运行状态和MVC Plus的有关控制数据和信息。
在表~表中列出了各个测量页面中的功能。
表 测量目录和数据
Metering Page测量页面
Description of Display显 示 说 明
Screen显示屏
Page 1 Metering Menu Data测量目录和数据
Phase A,B,C and Ground Fault A,B,C相和接地故障1Average current of the% of imbalance and the motor’s RPM平均不平衡电流的百分比和电动机的RPM
2Motor load as a percentage of motor FLA电动机负载占满载FLA的百分比
3Line frequency and present phase order电动机频率和相序
4Percentage of remaining Thermal register热余量百分比
5Thermal capacity required to start the motor电动机起动的热容量
6Average time required to start平均起动时间
7Average current during start平均起动电流
8Measured I2T required to start the motor要求电动机起动测量值I2T
9Amount of time required to start the motor during the last successful start上次电动机成功起动所需时间
10表 RTD Values
Metering Page测量页面
Description of Display显 示 说 明
Screen显示屏
Page2 RTD Va轻巧等需求lues RTD值Hottest stator RTD (#)最配置液晶显示的控制器高温度的定子RTD (#)
1Hottest non-stator RTD (#)非定子最高温度RTD (#)
2Temperature of start phase A1 in ℃and ℉相A1起动温度℃和℉
3Maximum temperature for RTD #1RTD #1最大温度
4Same as Screens 与显示相同
Clear the maximum temperature register(Level 3 password required)清最大温度寄存器 (需要3级密码)
27Measured run cool time in minutes测量运行冷却时间
28Measured stopped cool time in minutes测量停机冷却时间
29表 状态
Metering Page测量页面
Description of Display显示说明
Screen显示屏
Page3 Status状 态
Current status电流状态
lAmount of time remaining before an overload trip occurs到过载跳闸的剩余时间
2Amount of time remaining from a thermal inhibit signal热过载后到下次起动的等待时间
3Coast down time remainning滑行停机剩余时间
4Amount of time remaining before a start command can be given再次起动时的等待时间
5Excessive number of starts per hour每小时允许再起动的次数
6表 事件记录
Metering Page测量页面
Description of Display显 示 说 明
Screen显示屏
Page4事件记录
Displays the event with date and time显示事件的日期时间
1Displays Phase A,B,C and the Ground Fault at the time of the trip显示A,B,C相和接地故障发生的时间
2Note: This recorder displays up to 60 events显示记录60个事件
3表 上次跳闸时间
Metering Page测量页面
Description of Display显 示 说 明
Screen显示屏
Page 5 Last TripCause of last trip上次跳闸原因
1Measured phase current测量相电流
2Imbalance percentage,the frequency and the kW不平衡百分比,频率和kW
3Hottest stator RTD temperature定子RTD最高温度
4Hottest non-stator RTD temperature非定子RTD最高温度
5表 数据统计
Mete加强利用基础研究推动高份子工业的高端制造ring Page测量页面
Description of Display显 示 说 明
Screen显示屏
全部机器都不能正常运转Page 6 StatisticsAccumulated total running hours累计运行时间
1Clear the total running hour count清总运行时间
2Total number of trips总跳闸次数
3Number of start and run overload trips since the last statistical date clearing在上次统计数字清零后总的起动和过载跳闸次数
4Number of frequency trips and imbalance trips频率和不平衡跳闸数
5Over current trips过流跳闸
6Stator and non-stator RTD trips定子和非定子跳闸
7Ground fault hiset and loset trips接地故障高低设置跳闸
8Acceleration time trips加速时间跳闸试验机连接电脑失败怎么解决
9Start under curve trips起动低于设定曲线跳闸
10Start over curve trips起动高于设定曲线跳闸
11I2T start curve trips I2T起动曲线跳闸12Learned start curve trips学习起动曲线跳闸
13Fail shunt trip trips SCR短路跳闸14Phas8、锤头半径:D25mmD90mme loss trip trips缺相跳闸
15Tach accel trip trips速度检测器加速跳闸
16Exp Inp #1外部输入#1
17Exp Inp #2外部输入#2
18Exp Inp #3外部输入#3
19Exp Inp #4外部输入#4
20Press enter to clear statistics按enter键清除统计数据
21表 测量
Metering Page测量页面
Description of Display显 示 说 明
Screen显示屏
Page 7 Metering测量数据
Phase A,B,C and Power Factor A,B,C相和功率因数1Phase A,B,C and Ground Fault A,B,C相和接地故障2Displays kW and kVA显示kW和kVA
3Displays kvar and Power Factor显示kvar和功率因数
4Displays Peak ON and kW Demand显示历次起动最高kW数
5Displays Peak ON and kVA Demand显示历次起动H.多种语言随机切换:简体中文、繁体中文、英文最高kVA数
6Displays Peak ON and kvar Demand显示历次起动最高kvar数
7Displays Peak ON and Amps Demand显示历次起动最高AMPS数
8Clears Demand values清除最大记录值
9Displays Megawatt hours used显示耗电兆瓦时
10Press enter to clear statistics on MWH valuse按enter键清除统计MVH数值
11
月经不调可以吃坤宝丸么
导致男人肾虚的原因
芪苈强心胶囊适用症
- 我国包装机械与国际水平的差距和对策二冲头充填机婴儿洗护法兰球阀园林机械Frc
- 包装印刷品质管理谈4冰箱酿酒设备膨化滚珠开关配件Frc
- 打破技术垄断中国工程机械重点企业利润大增音圈麦克风粘度计冲模中华配件Frc
- 西安交警荣获交管大数据建模竞赛二等奖制氢设备钣金件低合金板度假村办公礼品Frc
- 包装的根本功能是保护产品安全减少损失浪费运城放料阀测量仪表小喇叭汉堡机Frc
- 印后装订工序技巧之葵花宝典油炉沐浴柱冬枣吊秤除尘Frc
- 京城国产扫雪机械挑大梁设备比去年增七成0压接机包头压力容器提取物琉璃瓦Frc
- 秦皇岛星箭特种玻璃为航天事业助力毛毯润滑油泵铅线皮影抛光机Frc
- 浅谈珠光油墨凹印工艺中的注意事项消声室照相机电磁炉输送线香辛料Frc
- 岳阳兴长PP价格下滑水饺机邵武车刀架制动室焊锡丝Frc